6″ DEEP TRAY
| SHAPED PART NUMBER | ROUND PART NUMBER | WIDTH | WT Per Pc. | FILL* | LOAD lbs/ft | SPLICE quantity | CUT SHEET (SHAPED) | CUT SHEET (ROUND) |
|---|---|---|---|---|---|---|---|---|
| WBT6X8 S | WBT6X8 | 8" | 23 lbs | 623 | 116 | 6 | Download Cut Sheet | Download Cut Sheet |
| WBT6X12 S | WBT6X12 | 12" | 27 lbs | 931 | 123 | 6 | Download Cut Sheet | Download Cut Sheet |
| WBT6X16 S | WBT6X16 | 16" | 31 lbs | 1255 | 123 | 7 | Download Cut Sheet | Download Cut Sheet |
| WBT6X18 S | WBT6X18 | 18" | 33 lbs | 1413 | 127 | 7 | Download Cut Sheet | Download Cut Sheet |
| WBT6X20 S | WBT6X20 | 18" | 35 lbs | 1571 | 127 | 7 | Download Cut Sheet | Download Cut Sheet |
| WBT6X22 S | WBT6X22 | 22" | 37 lbs | 1728 | 127 | 8 | Download Cut Sheet | Download Cut Sheet |
| WBT6X24 S | WBT6X24 | 24" | 39 lbs | 1886 | 150 | 8 | Download Cut Sheet | Download Cut Sheet |
*Finished tray length is 118 3/16"
*Fill is a theoretical calculation based on a .22" diameter cable and a 50% fill.
*WBT’s fill rate is based on the NEC allowable fill of 50%. The NEC rule states that the cable cross section areas together may not exceed 50% of the tray area (width x depth = fill). Cables will almost completely fill the tray when reaching the 50% fill rate due to empty space between round cables and how the cables are installed.
- available finishes:
- standardpre-galvanized
(eco-friendly) - zpelectro zinc plating
- pwpewter powder coated
- blblack
- whwhite
- cpccustom powder coated
- 304L/316L304L stainless steel &
316L stainless steel
